iControlAV5 Application & Technical Support

Connect an AV receiver and/or a Blu-Ray disc player to your network environment.

Connect an iPhone/iPod touch to your Wi-Fi network environment.

Switch on the AV receiver and/or Blu-Ray disc player.

Start iControlAV5.

* If your AV receiver is the one released in 2012 or later, your AV receiver can be connected up to four iControlAV5 simultaneously.
If multiple users are controlling the same device simultaneously, the last operation will take effect.

* Blu-Ray Disc Players do not support control by multiple iOS devices simultaneously.

* This is an example in case of connection with an iControlAV5-ready Pioneer Blu-ray Disc player.
You can connect with AV receiver in the same way.

  Navigating iControlAV5

The Home Menu of iControlAV5 is organized into two main sections:
    Upper: Basic Operation, including CONTROL, INPUT SELECT, LISTENING MODE and CURSOR
    Lower: Pioneer Unique Sound Settings, including STATUS VIEWER, AV SCALER, EMPHASIS, BALANCE, FINGER EQ and SOUND EXPLORER

From the Home Menu you can access each section by swiping to and tapping the desired section.
From within a particular section (ex. Input Select), you can access other sections by swiping the Navigation Bar (pictured) left or right. Swipe the Navigation Bar up or down to access
the Upper and Lower sections.

You can move to the next page in the direction of ▲*1

Navigation Bar
(You can operate with finger Flick action)

■Navigation Structure:

You can see the next page by tapping and holding 
You can return to the "HOME MENU" by tapping 

  HOME MENU　<direct select all page>

1. Accessing the "Basic Operation" pages:

You can move to "CONTROL", "INPUT SELECT", "LISTENING MODE", "CURSOR" by tapping each image. *1
Swipe to the left or right to access each page.

2. Accessing the "Pioneer Unique Sound Setting" pages:

You can move to "SOUND EXPLORER", "STATUS VIEWER","AV SCALER","EMPHASIS", "BALANCE", "FINGER EQ" by tapping each image. *1
Swipe to the left or right to access each page.

3. "ECO MANAGER"

You can access the "ECO MANAGER" page by tapping ECO button. *2

4. "SETTINGS"

Access settings like Select Product, Operation Mode, Demo Mode, etc

5. "AVNavigator"

Switched to the browser application and AVNavigator is displayed. *2

6. "BDP CONTROL"

When a compatible Pioneer Blu-ray Disc Player is connected, tap this button to access the BDP Control page. *3

7. "ZONE"

Tap this button to access different Zones *4
* Not all features are supported, depending on the Zone selected.

  "ECO MANAGER"　<Manges the AV Receiver' energy saving ECO modes>

1. "During Playback"

You can select the listening mode "ECO MODE1"or "ECO MODE2"to adjust settings for energy paving playback.
- "ECO MODE1" is effective for content played at higher volumes consistently. （i.e. Music playback)
- "ECO MODE2" is effective for sources with dynamic content. (i.e. Movies)
* Power consumption can be reduced more with "ECO MODE2" than "ECO MODE1".
* If another listening mode is selected on the LISTENING MODE page, ECO MODE will be turned off.

2. "At Stand-By"

Power consumption can be adjusted in 3 grouped settings:
"Maximum", "Middle" and "Minimum", where "Maximum" is the most aggressive in reducing power consumption.
The power consumption settings in "Maximum" and "Middle" are fixed. The settings in "Minimum" can be adjusted.
* In both "Maximum" or "Minimum with Network standby is OFF", in this case you can not turn on the AV receiver using iControlAV5.
* When ARC is "OFF", the TV's audio may not be outputted from the AV receiver.

3. "When Not in Use"

You can set the amount of time before the AV receiver automatically turns off (when not receiving an audio or video signal).

4. For an explanation of "ECO MANAGER", tap the button.

  "CONTROL"<basic AV receiver functions control page>

1. "POWER"

You can switch on/off power of the AV receiver by tapping  button.  *4

2. "VOLUME"

You can adjust the AV receiver volume by dragging the "VOLUME" dial.

3. "MUTE"

You can mute the sound by tapping  button.

4. "Change to "Other setting page" *2

You can access "TONE/BALANCE"and "VIDEO MODE" by tappingbutton.

* Depending on the current LISTENING MODE selected, it may not be possible to adjust "TONE/BALANCE".

You can adjust bass, treble and balance from "TONE/BALANCE" page.
In case Sub Zone is selected, you can adjust "Balance LR".
In case Main Zone is selected, the "BALANCE" page appears by tapping  button. From this page you can control the multi channel sound balance.

You can adjust the video function setting on the "VIDEO MODE"page.
* Please refer to the AV receiver's owners manual for more information on video paramater adjustments.

  "INPUT SELECT"　<Changing the input function>

1. "Input function table"

When the various input function icons are tapped, the input function changes.

2. "Input operations"

Tapping the button on certain inputs takes you to that input's control screen.
* If you want to listen to Spotify on your Pioneer AV Receiver, you have to open the "Spotify App".
* Spotify function does not work in areas where the Spotify service is not available.

3. "HDMI OUT" *2

You can select the HDMI OUT by tapping  button.
* Depending on HDMI standard specification, using dual monitor output(the both of HDMI out1 and out2)
simultaneously, HDMI output resolution from AV receiver is adjusted to fit for the lower resolution monitor.

4. "PUSH PLAYER"
     （Please refer for the below "PUSH PLAYER" in detail） *2

"PUSH PLAYER" allows you to access your iOS device's music library directly from iControlAV5 to stream wirelessly to the AV receiver.
To access "PUSH PLAYER", tap the   button.

* When multiple zones are connected, you can select the zone to play music to by accessing the "SETTINGS" menu.
* If a selected ZONE does not support the AirPlay, button will not appear.

  "INPUT OPERATIONS"　<Operation of INPUT source>

The section below details the operation of the "INTERNET RADIO", "MEDIA SERVER", "FAVORITES" and "iPod/USB" inputs.

1. "LIST"

Shows a list of tracks that are accessible from the selected input.

You can register your favorite music and radio staion to the "FAVORITES" about "INTERNET RADIO", "MEDIA SERVER" by keeping touch the cell of them.
On the other hand, you can also delete your registered favorite from the list of "FAVORITES" by keeping touch the cell of them.

* As for "INPUT CONTROL", you can register during playback.

2. "UPDATE"

Tapping this button will update the list that is displayed.

3. "TOP MENU"

Tapping the button causes switching to the playback screen.

4. "Switching to the playback screen" *2

Tapping the button causes switching to the playback screen.

5. "Search & Sort" *2

Displayed when operating the server handling search or sort when the input function is MEDIA SERVER and by tapping, the menu on the right appears.

5-1. "Searching the entire server"
After selecting the sever, performs searching the entire server.

5-2. "Searching the current folder and below"
Search is performed on the current folder and below.

5-3. "Sort"
Switches between the truck order and alphabetical order.

About the search function

Switches between the truck order and alphabetical order.
The entered search keyword is requested to the server supporting the search function and the search result notified by the server is displayed in the iControlAV5 list.
Even though the music is the same, if the same music is registered in each folder configured in the server, the search result is displayed in duplicate.
If you wish to reduce the duplicated display of the search result, use the Folder search to narrow down the target range of search.
Also, the search function depends on the specifications of each server, it does not mean that same search result can be obtained from all servers.

6. "Playback operations panel"

Allows basic playback control.
* The available buttons differ depending on the input selected and the content being played back.

7. "Switch to the Spotify App"

Tapping the button will launch/switch to the Spotify App.

You can select the PRESET about "TUNER" function, if you had registered a redio station behorehand.

  "BDP CONTROL"　<basic Blu-Ray disc player functions control page>

1. "POWER"

 You can switch on/off power of the Ble-ray disc player by tapping  button.  *6

2. "OPERATION MODE"

You can select the operation mode.
* You can select the "basic operation mode" by tapping  button. In this mode, play mode control keys (including PLAY, PAUSE etc) are appeared.
* You can select the"Cross" interface by tapping  button.

3. "Cross"

You can move cursor by flicking up/down/left/right. Tap action means "ENTER".  *7

  "PUSH PLAYER"　<Playing music files stored in your iPhone/iPod touch>

"PUSH PLAYER" allows you to access your iOS device's music library directly from iControlAV5 to stream wirelessly to the AV receiver.
AirPlay is used to output audio to this unit.
* When multiple zones are connected, you can select the zone to play music to by accessing the "SETTINGS" menu.
* If a selected ZONE does not support the AirPlay, you can not select this.

1. "Music Laibrary"

Music file on iPhone/iPot touch will be displayed.
Tap a track name on the list to start playback.

2. "Playback operation screen"

Allows playback control.

3. "Now playing list"

Displays the list currently being played.

4. "Audio output"

Tap this button to display a list of currently connected AirPlay devices Select ayour AV reciever from the Audio output list and music will play to it.
* If no connected AirPlay devices are found, the  will not appear.
* The Audio output screen will display all devices compatible with AirPlay in your network environment.

Music Laibrary

Playback operation screen

Now playing list

  "LISTENING MODE"　<Selecting the LISTENING MODE>

You can select the LISTENING MODE by tapping each LISTENING MODE.
* Not all listening modes are available, depending on the input selected.
* If you set the "ECO MODE" on the ECO MANAGER page, you can change to the normal LISTENING MODE in this page.

  "CURSOR"　<It is possible to use the up-down-left-right key to operate the AV receiver.> *1 *2

On this screen, use the up-down-left-right key to operate the AV receiver.
Perform operation while looking at the front panel display of the AV receiver or the screen of the connected display.

1. "OPERATION MODE"

You can select the operation mode.

When setting the AV receiver, select "RECEIVER".
When performing operation unique to each input function, select operation mode of each function at the right side.
* Some input functions do not have operation mode unique to input function.

  "STATUS VIEWER"　<Shows your home theater's real-time status> *2

"STATUS VIEWER" gives you a real-time look at your home theater environment and the speakers and components you have connected.
Speakers that are connected to the AV receiver are indicated. Speakers currently outputing audio are blinking.
Yellow speaker means "Virtual speaker". Red speaker means "Bi-AMP connection".

You can see additional detail for each component by tapping its corresponding  button.

1. "MONITOR"

You can check a connected Monitor or Television's current status

2. "RECEIVER"

You can check the AV receiver's actual input and output signal information.

3. "SPEAKER"

You can check the status of speakers connected to the AV receiver.

4. "INPUT"

You can check the INPUT signal information of your AV receiver.

5. "LINK"

You can check the actual playing signal information and sound field image of your AV receiver.

6. "PHASE"

You can check the status of revised Phase by your AV receiver.

7. "CH LEVEL"

By tapping each speaker, the level can be adjusted or muted for each speaker.

Also, it is possible to save the current level of all speakers.
Tap the "SAVE" button and then tap the number you wish to save.
Note that the MUTE status is not saved.
To read out the saved status, tap the "LOAD" button and then tap the memory number you wish to read out.

  "SOUND EXPLORER" *2

Here you can set the sound field adjustment function for the AV receiver.  *8

1. "Setting parameters for each individual function"

You can adjust the settings of each function by tapping its circle icon.
Not all Sound settings are supported by your AV receiver. Those that are supported are lighted.

2. "Function Explanation"

When you push  button that is appears when an icon has been selected, an easy explanation of the function is displayed.
When an  button is displayed on the function explanation page, hitting that button allows you to watch an explanation movie about that function. *9

3. "Operation mode"

You can select the operation mode.
The drop icon mode - circle function icons fall from the top - is activated by tapping  button.
The fixed icon position mode is selected by tapping  button.
The list mode - all functions and their settings are listed - appears by tapping  button.
     You can return to the icon mode by tapping  button.

4. "UNDO" / "REDO"

After making a change, tapping the  button will revert the changes just made back to the original settings.
You can redo the setting changes canceled with  button again by tapping   button.

5. "RESET"

When you select "Return to the previous status", all settings are returned to the state before "SOUND EXPLORER" mode was started.
When you select "Reset to factory defaults", all settings in "SOUND EXPLORER" are returned to the factory default settings. *9

  "AV SCALER" *1 *2

1. "AUDIO"

 * You cannot use this function when there is no signal or the input signal is multichannel audio.

By connecting INPUT to OUTPUT using drag, change the multiple setting of sampling frequency.
The AV receiver's "UpSampling" setting is changed.

You can change the setting of Hi-bit or Digital Filter by tapping the  button.

2. "VIDEO"

* You cannot use this function when there is no signal or the video converter setting is off.

By connecting INPUT to OUTPUT using drag, change the resolution of the output signal.
The AV receiver's "Resolution" setting is changed.

Audio

Video

  "EMPHASIS" *2

These settings can be adjusted using your iOS device's built-in gyroscope to "tilt" to the desired setting.

1. "Bass"

The Bass page appears by tapping the "Bass" button.
Tilt your device toward you to increase the bass level. Tilt it away from you to decrease the bass level.

2. "Dialogue"

The Dialogue page appears by tapping the "Dialogue" button. Tilt your device toward you to increase the dialogue level. Tilt it away from you to decrease the dialogue level.

* When the receiver is turned off or put in standby, the "EMPHASIS" settings are reset.

  "FINGER EQ" *2

You can adjust the EQ settings from the "FINGER EQ" page.
Effects are applied to all of output channels simultaneously. Once you draw a frequency pattern by dragging on the display, adjustments are excuted.
You can save a frequency pattern by tapping "Save" pattern. You can recall a saved frequency pattern by tapping "Load" button.
* When the receiver is turned off or put in standby, the EQ settings are reset.

  "BALANCE" *2

Balance can be adjusted using your iOS device's built-in gyroscope to "tilt" to the desired audio balance.

Tilt your iOS device to move the ball to the desired position. The ball's position represents the balance of the audio in your home theater.
Once the ball is in the desired position, tap the display to "Save" the position.
* When the receiver is turned off or put in standby, the Balance settings are reset.

  "SETTINGS"

1. "Select Product"

In this page, you can retrieve and connect to the target device.
This page will be utilized when you want to add a controlled equipment or connection procedure is failed in case of starting iControlAV5.

1-1．"AVR/BDP"

AV receiver selection page appears by tapping "AVR" button.
Blu Ray disc player selection page appears by tapping "BDP" button.

1-2．"ON/OFF"

Select "ON" if you want to connect to (and control) a related equipment. Select "OFF" if you do not want to.
As example, if you want to connect to the AV receiver and not to connect to the BDP,
select "ON" on the AVR page, and select "OFF" on the BDP page.

1-3．"UPDATE"

By tapping "UPDATE" button, iPhone/iPod touch starts to search iControlAV5-ready equipments connected to your network environment,
and display discovered model names. You can connect to the target equipment by tapping its model name.

1-4．"IP Address"

You can connect to the target equipment not only by "UPDATE" search, but also by direct IP address input.
IP address input page appears by tapping "IP address". Input an IP address of the target device and tap "SEARCH" button.
*To learn how to check the IP address, please refer to the owners' manual of the taeget device.

2. "Operation mode"　*2 *11

AV receiver has a various functions and settings.
To provide comfortable usabilities from beginners to AV enthusiasts, two operation modes are prepared.
  - Experts : You can adjust all functions by yourself.
  - Basic : To realize simple control, limited functions are provided. Each functions are prepared to provide optimised functions and settings.

3. "Play ZONE Setup"　*2 *11

Select the ZONE to play music to via AirPlay or DMR.

4. "Demo Mode"

You can swtich on/off of Demo mode. In Demo mode, you can preview iControlAV5 without connecting to the target equipment.

5. "Input Edit"　*11

You can edit input function name by taping "Input Edit" button.
This result reflects to the "INPUT SELECT" page and AV receiver display.

You can permute the order of input functions by tapping "Reorder".
You can also remove the unnecessary input function from the input function list by tapping the checkbox so as to disappear the check.
This result reflects to the "INPUT SELECT" page.(but does not reflect to the AV receiver).

6. "Software updates to the receiver" *2 *11

when new software for your receiver is available, this setting is shown.
You can update the software of your receiver.
* Do not unplug the power cord while carrying out software updates. This could seriously damage your receiver.

7. "Version Info"

You can find the version information on this page.

• Does your iPhone/iPod touch/iPad connect to your network via Wi-Fi? Once a Wi-Fi connection is engaged, a Wi-Fi icon Does your iPhone/iPod touch/iPad connect to your network via Wi-Fi?
  Once a Wi-Fi connection is engaged, a Wi-Fi icon  appears on the upper left corner of your iPhone/iPod touch/iPad screen.

• Does your AV receiver and/or Blu-ray disc player connect to your network?
  Please connect it/them to the same network as your iPhone/iPod touch/iPad are connected.
  （Please connect your AV receiver and/or Blu-ray disc player to your network access point)

• Is your AV receiver and/or Blu-ray disc player turned on?
  If your AV receiver's Network Standby is set to ON （In the case of a Blu-ray disc player, "Quick-Start" or "Network Standby" is ON）, you can use iControlAV5 to control your AV receiver and/or Blu-ray disc player when they are in standby mode.

• Did you already connect iControlAV5 to Blu-ray Disc player from another iPhone/iPod touch/iPad/Android?
  If so, you cannot connect multiple iPhone/iPod touch/iPad/Android to Blu-ray Disc player at the same time.

• During the iControlAV5 starting process, did you change the IP adress of the AV receiver and/or Blu-ray Disc player manually?
  If so, exit iControlAV5 and restart the application.

• Is your AV receiver and/or Blu-ray Disc player compatible with iControlAV5?
  Please refer to the list of compatible models for iControlAV5 on the introduction page of the app.

• Does your Blu-ray disc player connect to the internet?
  If you don't connect your Blu-ray disc player to the internet, its network set-up is not yet completed.